Shelby Full Car Ceramic Coating kit

Originally formulated for a luxury yacht manufacturer where the need to gain the highest hydrophobic properties are an understatement, we've used this experience, expertise and heritage to bring you a fantastic coating for every marque of car.

Our production team have sweated blood and tears to bring you their best ever formula which is easily applied, easily buffed and easily the best finish you'll ever see.

Shelby's ceramic coating is the perfect protective coating for the following surfaces:

• ALL vehicle exterior surfaces including paintwork, glass, plastics, rubbers INC Tyres
• Most interior hard surfaces
• Motorbikes
• Caravans, Campervans and all RV's
• All 4x4 vehicles
• All marine and watercraft
• Race prepped cars and boats - slips through air and water so much faster giving you the vital edge over your competition
• Most household hard surfaces, if using on a porous material test on a small area first

Our customer tell us that they've used the coating and the detailer on:

• Metal and ceramic sinks and baths.
• Shower screens and tiling
• Conservatories both glass and upvc panels
• Motorbikes
• Jet ski's
• Splash back panels in kitchens
• Boats
• Watch glass
• Bike helmets
• Outdoor furniture
• Garage doors
• Ski's

Before applying to your car, we strongly recommend you have the car surface as clean as possible as once applied, this coating is there to stay. For best results, use our Official Shelby Shampoo.

Application couldn’t be easier. On the cleanest surface you can manage and are happy with, apply our ceramic coating one panel at a time.

Using a good quality applicator pad, apply in long straight strokes, in one direction first (North to South for instance) and then in the other direction (East to West) until you see the panel is covered.
Each panel will take approximately 30-60 secs mins max to cure initially, then simply buff off with a damp cloth to reveal a glass like finish to your paintwork. See "Tips" for additional pointers!

Additional layers will improve the look and quality of the coating and can be applied after a full 24hrs after the first coating (6 hrs under good conditions). It’s also fairly important not to wash your vehicle with any detergents for 24 hrs after application. The coating is rain repellent after ONLY 20 mins.

Our product will remain bonded to the surface and will not become brittle, which means a harder wearing and longer lasting protective layer.

Each 50ml bottle is sufficient to coat a minimum of 2 family sized cars at least once.

Depending on weather conditions, atmospheric conditions and surface conditions, all have a part to play in determining the length of time to flash and buff off. The ideal application conditions are a temperature controlled room. How many of us have that. Very few.

Our ideal conditions will be between 8 and 25 degrees centigrade. Mild conditions of low wind or no wind, and not direct sunlight. So where conditions vary to the above you need to allow differing curing times. Warm, dry conditions with a mild breeze, drying will occur quicker. Colder, damper conditions will add a few minutes. It's that simple.

If you find the product needs more of an effort to buff, simply use a clean, warm damp cloth. You wont damage the coating, but you'll make buffing it easier. We dont advise anyone to apply in temperatures less than 8 degrees centigrade.

Although this product is jam packed full of ceramic technology and will hide many minor scratches and swirls, it will not completely hide, mask, or remove any major swirl marks and scratches previously on the surface.

If your surface is badly marked, seek advice from a professional and reputable Detailer. We have approved CSL Shelby Detailers dotted around the country - contact us for your nearest.

Please also note that the liquid is blue in colour and is designed to be equally effective on the brightest and most pristine polar white to the darkest midnight black vehicles and surfaces. The blue is our signature colour range.